This aircraft is based off the DreamWings Q400. Made FSX native by Eagle Rotorcraft (George Arana), whom I received permission from to modify the base Q400 into this airtanker configuration. This project wouldn't have been possible without their prior work on the base aircraft. The Q400-AT is capable of carrying 2,600 gallons of fire retardant or water. The Q400-AT is a rising platform in aerial firefighting. First began use in Canada and France. Within the last two years has now also been used in Australia and the United States. This aircraft retains most of it's stock characteristics except for the addition of the external tank, adjusted VC position, and a few flight dynamics changes that affect it's flight characteristics of it being a tanker. The package comes with 3 total liveries. 2 from Conair of Canada, T-141 represents overseas contract with Queensland Fire and Emergency Services of Australia and T-540 represents the Alaska Division of Forestry in the United States. T-540 does not hold any official markings for this contract and therefore is identical to it's Canadian operation appearance. The last livery represented is for T-76 of Securite Civile in France. This addon is or P3Dv4+ only. This package includes the entire aircraft. Repaints and aircraft conversion by Nicholas Mitchell.

This is an update for FSX of the Lockheed Electra by Mike Stone. I have added to, or changed some of the gauges on the panel; added a HUD in a window; and updated the flight dynamics. No VC.

BEECHCRAFT AT-11 w/original cockpit and gauges for use with MSFS2020. "Special Thanks to Milton Shupe for permission to use original 2004/FSX model". Credits:Damian "Windrunner" Radice for original textures. Credits: MSFS Legacy Importer by Alex Marko. https://www.nexusmods.com/microsoftflightsimulator/mods/117 The Army Air Force AT-11 was an advanced twin engine trainer that was used to train Bombardiers, Gunners and Navigators during and after WWII. Over 90% of all of the Bombardiers in WWII trained in this glass-nosed version of the famous Twin Beech. Known Issues (V1.0): Some gauges are not fully functional at the this time. Start from runway. Current Version BETA 1.0 by donfanucci

A revamp of the payware Dino Cattaneo Typhoon 30+12 painted with the Luftwaffe blueish tint. Not tested below P3DV4 & 5

FSX/P3D Boeing 737-Max 8 Ruili Airlines package with new Max VC. Ruili Airlines is a Chinese airline based at Kunming Changshui International Airport and flying a range of Boeing 737's to destinations around China and south east Asia. Currently Ruili have 60 Boeing 737 Max on order. The high spec Boeing 737-Max 8 from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS fantastic native FSX Boeing Max8 model. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.

FSX/P3D Boeing 737-Max 8 Caribbean Airlines package with new Max VC. Based at Piarco International Airport, Trinidad and Tobago flag carrier airline Caribbean flies to destinationa around the Caribbean Islands as well as the USA. Currently Caribbean Airlines has 12 Boeing 737 Max 8 on order. The high spec Boeing 737-Max 8 from TDS. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. Credits go to TDS fantastic native FSX Boeing Max8 model. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.

Lockheed WP-3D Hurricane Hunters. Team FS KBT P-3 Series Ver.1.1 Fixed TACCO crew upper right arm texture. (Excluding US NAVY ) Effect files are included with all models.(Excluding US NAVY and German Marine ). This P-3 series is an FSX legacy version. The VC reads the default B747. You may disagree with this technique, but only download it if you can tolerate it. There are some changes to the model for MSFS2020, so it doesn't make sense to use it with FSX or P3Dv4. Team FS KBT

This P-3 series is an FSX legacy version. The VC reads the default B747. You may disagree with this technique, but only download it if you can tolerate it. There are some changes to the model for MSFS2020, so it doesn't make sense to use it with FSX or P3Dv4. Includes new light effects and installation.txt. What you can and cannot do. Gimmicks made with FSX and P3Dv4 cannot be used. The engine cannot be restarted or cold started. You can stop the engine individually, but you cannot feathering. (The propeller pitch can be moved depending on the setting.) Autopilot and autothrottle conform to B747. Current Version 1.0 by kbt

Team FS KBT P-3 Series Ver.1.1 Fixed TACCO crew upper right arm texture. (Excluding US NAVY ) Effect files are included with all models.(Excluding US NAVY and German Marine ). Fixed material errors on the left and right sides of the fuselage. This P-3 series is an FSX legacy version. The VC reads the default B747. You may disagree with this technique, but only download it if you can tolerate it. There are some changes to the model for MSFS2020, so it doesn't make sense to use it with FSX or P3Dv4. By KBT

Team FS KBT P-3 Series Ver.1.1 Fixed TACCO crew upper right arm texture. (Excluding US NAVY ) Effect files are included with all models.(Excluding US NAVY and German Marine ) Team FS KBT P-3 Series Ver.1.1.1 (CP-140 only) Fixed material errors on the left and right sides of the fuselage. This P-3 series is an FSX legacy version. The VC reads the default B747. You may disagree with this technique, but only download it if you can tolerate it. There are some changes to the model for MSFS2020, so it doesn't make sense to use it with FSX or P3Dv4.