CFS2 Korean Campaign 1: The Hunters (CFS2_KW_C1 ZIP) 
(CFS2 KOREAN WAR PACKS 1&2 REQUIRED)
Tom Sanford, The Fox Four Group, May 2003
thomas.r.sanford@gte.net

Read this document in Notepad with Format/Word Wrap option selected.

Presented by The Fox Four Group - http://www.simviation.com/lair/cfs2korea.htm
(Doug Attrell, Mike Eustace, Tom Sanford & Hayden Scott-Williams)

***********
DESCRIPTION
***********

This is the first in a series of Korean War campaigns for CFS2, and includes two complete, original player F-86E Sabre Jets with fully moveable/breakable parts, opening canopy, working airbrakes, payloads and full panels:

- Kw F-86E (USAF), Hayden Scott-Williams, fang@pyromania.co.za
  Panel, Gauges & AIR file by Mike Eustace, IndigoBlack@aol.com
  Droptanks by Doug Attrell, DAttrell@aol.com
- KW F-86E SAAF, Hayden Scott-Williams
  Panel, Gauges & AIR file by Mike Eustace, Droptanks by Doug Attrell


"The Hunters" is a 24-mission linear campaign.  It requires the CFS2 Korean War Packs 1 and 2 containing the 8 AI aircraft, Steve McClelland's updated Far East scenery,Korean GPS map and vehicle/bridge/viaduct files.

You will fly either of two F-86E Sabres(USAF or SAAF) from several bases against Communist forces flying the MiG-15(2 types),Yak-9P,La-11 and Tu-2 circa 1950-51.  AI aircraft flying on the UN side include the B-26B, B-29 and S-51.

The campaign was designed to use the WARP feature of CFS2.  That feature is enabled at all times when the player is not engaged with the enemy, or in an area designated a Combat Zone.  You will not miss anything in a mission by using the WARP feature.
 

************
INSTALLATION
************

The included file is a self-extracting ZIP that will install all files in the proper folders of your CFS2 main directory.  Simply run the self-extracting file, and point it at the directory of your hard-drive that contains your CFS2 main directory. EXAMPLE: If you have a default CFS2 installation, you would point the self-extractor at C:/Program Files/Microsoft Games.

After installation the campaign will appear in your CFS2 Campaigns menu, and the two F-86s will appear in your Free Flight menu.

The missions are also playble individually from the Single Missions menu.

IMPORTANT #1
************
To avoid the "exploding jets" problem with jet aircraft in CFS2, you must make the following manual change to your CFS2.cfg file, which is located in the main CFS2 directory:

- Open the CFS2.cfg file in Notepad.
- Scroll down to the [REALISM] section.
- Change 'StressDamage=True' entry to read 'StressDamage=False'.
- Save and close the file.  That's it.

This option cannot be accessed from any in-program menus, and can be changed back manually or left in place permanently.

IMPORTANT #2
************
In order to use the Advanced Information feature of CFS2 with this campaign, you must:

1.(Strongly Suggested) Replace your existing CFS2/INFO/airbases.dat file with the one provided in this package.  You may backup your original, if you wish for reuse later.  This is only needed, if it is customized. If yours is a stock file, you can use our replacement permanently because it contains the stock CFS2 airfields plus the Korean airfields.  Simply PASTE it into your CFS2/INFO folder and it will overwrite the existing file.

OR

2.(Less Reliable Option) Add the Korean airfield entries listed below to the airbases.dat file in your CFS2/INFO folder.  To do so, open your airbases.dat file in Notepad.  Make a space between the last runway entry and the small rectangle symbol(make sure not to delete this symbol).  Copy/Paste the following new entries into the the space you have made. You MUST then renumber the "[runway.xxx]" and "id=xxxx" fields in each these new entries sequentially,beginning with the corresponding numbers in your last original entry plus 1.  Example:  If your last original entry was "[runway.138]" with "id=8060", then you would begin renumbering the new entries with "[runway.139]" and "id=8061".  Understand that there CANNOT be any duplicate runway or id numbers in your airbases.dat file: 


[runway.126] 
id=8053 
name=Korea Suwon 
base_lat=N37 14.65 
base_lon=E127 0.00 
base_alt=85 
heading=146 
allegiance=0 
units_across=1 
takeoff_start_pos=-500,0 
takeoff_stop_pos=1600,200 
landing_start_pos=5000,350 
landing_touchdown_pos=500,0 
landing_stop_pos=-250,0 

[runway.127]
id=8054
name=Korea Sokcho
base_lat=N38 8.84
base_lon=E128 36.03
base_alt=99
heading=40
allegiance=0
units_across=1
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350 
landing_touchdown_pos=500,0 
landing_stop_pos=-250,0 

[runway.128]
id=8055
name=Korea Kanam-Ni
base_lat=N37 49.89
base_lon=E126 59.40
base_alt=296
heading=173
allegiance=0
units_across=1
takeoff_start_pos=-575,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550 
landing_touchdown_pos=600,0 
landing_stop_pos=-250,0 

[runway.129]
id=8056
name=Korea Mokpo
base_lat=N34 45.26
base_lon=E126 23.46
base_alt=28
heading=50
allegiance=0
units_across=1
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350 
landing_touchdown_pos=600,0 
landing_stop_pos=-650,0

[runway.130]
id=8057
name=Korea Yangku
base_lat=N38 5.31
base_lon=E127 59.20
base_alt=677
heading=163
allegiance=0
units_across=1
takeoff_start_pos=-450,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550 
landing_touchdown_pos=600,0 
landing_stop_pos=-450,0 

[runway.131]
id=8058
name=Korea Yechon
base_lat=N36 37.72
base_lon=E128 21.37
base_alt=355
heading=89
allegiance=0
units_across=2
takeoff_start_pos=-650,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,350 
landing_touchdown_pos=600,0 
landing_stop_pos=-950,0 

[runway.132]
id=8059
name=Korea Wonju
base_lat=N37 26.41
base_lon=E127 57.71
base_alt=332
heading=26
allegiance=0
units_across=2
takeoff_start_pos=-950,0
takeoff_stop_pos=1600,200
landing_start_pos=5000,550 
landing_touchdown_pos=600,0 
landing_stop_pos=-950,0

IF YOU DO NOT USE ONE OF THE ABOVE OPTIONS AND TRY TO ACCESS ADV INFO, CFS2 WILL CRASH TO DESKTOP.


This file is Freeware. The usual restrictions apply. Use it & enjoy it but do NOT make money from my work. It must not be included in a commercial package or hosted on another site without permission.